• The probe. Sealed and waterproof is placed under the boat's hull with a specific holding system to be waterproof and make sure no water comes into the hull. The probe is connected inside the boat to the transmitter box.
• The transmitter metal box is placed inside the boat. On one side it connects to the probe and the other side is connected to the antenna. The antenna is also with a connector to be easily removable. It features an on/off switch with a status LED. It's powered from
• separate 9 V battery. The wireless range is 300 m
• The receiver display the bottom information in real time and plot the bottom line. It detects fish and show their depth and size (big or small). It's simple to use with a friendly user interface. Display with high contrast to have a good reading even on sunny conditions. It runs on its own batteries.
• The receiver is "clipsed" on the boat's remote control handset for optimum confort on utilisation.

Receiver Specification:

• Receiver screen sealed and waterproof
• Display size is 3" (7.6 cm)
• Display: High contrast Dot Matrix LCD
• Display resolution: 130 vertical x 64 horizontal pixels
• Power: 4 x AAA alkaline batteries
• Battery life: 80 hours non stop use

Probe

• Depth range: 3 to 100 ft (30 meters)
• Sonar coverage: 80 degree@-10dB (115 kHz)
• Air temperature probe
• Wireless operating range 300 meters

Software

• Fish Identification Mode (big & small fish)
• Alarm for fish detect and/or shallow water.
• High/Low sensitivity setting
• Automatic or manual back light
• Adjustable display contrast
• Automatic Depth Range setting
• True changing bottom graph
• Depth Units: Meters/Feet
• Temperature Units: Celsius/Fahrenheit
• Preservable program setting
• Back up memory to save setting